DJI RONIN 2 + READYRIG OR AMORMAN 3.0
The versatile Ronin 2 gimbal from DJI is suitable for use handheld, or mounted in a variety of ways, including to a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. Now with the ability to stabilize digital cinema cameras like Alexa, Red, Sony and many more
Proaim Airwave V15 Camera Vibration Isolator Arm (33 to 110 lb)
Save wear and tear on your gimbal motor when mounting it on a car, boat, or any moving vehicle and achieve smooth motion shots with this heavy-duty Airwave V15 Camera Vibration Isolator Arm from Proaim. The arm utilizes high-tension, shock-absorbing springs designed for smooth movement of payloads up to 110 lb at high speeds.
The arm mounts onto a 1.5 to 2" diameter rod, rail, or pipe using dual locking clamps. Fine balance adjustments are made via knobs at multiple points along the arm's joints for forward-to-back and side-to-side gimbal movement. The mounting platform allows you to add an optional shock-absorbing head for more vibration reduction, or use it to mount your gimbal stabilizer, a remote pan-and-tilt head, or other camera mounts of your choice.
The included DJI-QR Flycam quick release mount allows you to mount gimbals such as the DJI Ronin, Ronin M/MX, or the MōVI M5, M10, M15, or Pro. An L-shaped mounting bracket is included to provide an alternative mounting option for your camera or gimbal. The arm breaks down into two parts and is stored and transported in the included heavy-duty flight case.
Proaim Magnus Versatile Camera Rickshaw
When you can't lay down a track but need to follow your subject with a smooth tracking shot, the Magnus Versatile Camera Rickshaw from Proaim can save the shot. Lightweight and portable, this camera rickshaw is designed for handheld or Steadicam-type tracking shots with an onboard operator, or it can be used with a separately available platform as a camera dolly. It enables the operator and/or camera to be pushed or pulled by a grip to facilitate complex tracking shots, especially over uneven terrain.
The two large rear wheels and two swiveling small front wheels create a smooth path, and the large wheels can be adjusted inward or outward for different loads. The adjustable push/pull bar tilts 90°, allowing the grip to push or pull the rickshaw in multiple configurations. It includes a height-adjustable seat with front-to-back positioning, two footrests, and a safety belt to keep the operator secure.
The Magnus is easy to assemble and break down without tools. A heavy-duty flight case is included to store and transport the rickshaw.
Dana Dolly - Portable Dolly System
16 Custom Dolly Track Wheels
Soft Polyurethane Track Wheels
ABEC-7 Rated Precision Bearings
Wheel Trucks Swivel for Curved Track
For Standard Speed Rail (1.66" O.D.)
Supports 100 lb of Camera & Accessories
Includes 75 & 100mm Bowl Adapaters
1/4"-20 & 3/8"16 Accessory Holes
Designed & Made In The USA
10 feet straight line